ENSLD Certification Training

Course Overview

Our 5- day, instructor-led ENSLD (Designing Cisco Enterprise Networks v1.0) training and certification boot camp in Washington, DC Metro, Tysons Corner, VA, Columbia, MD or Live Online gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR) v1.0 course. It will teach you:

• Design Enhanced Interior Gateway Routing Protocol (EIGRP) internal routing for the enterprise network
• Design Open Shortest Path First (OSPF) internal routing for the enterprise network
• Design Intermediate System to Intermediate System (IS-IS) internal routing for the enterprise network
• Design a network based on customer requirements
• Design Border Gateway Protocol (BGP) routing for the enterprise network
• Describe the different types and uses of Multiprotocol BGP (MP-BGP) address families
• Describe BGP load sharing
• Design a BGP network based on customer requirements
• Decide where the L2/L3 boundary will be in your Campus network and make design decisions
• Describe Layer 2 design considerations for Enterprise Campus networks
• Design a LAN network based on customer requirements
• Describe Layer 3 design considerations in an Enterprise Campus network Examine Cisco SD-Access fundamental concepts
• Describe Cisco SD-Access Fabric Design
• Design an Software-Defined Access (SD-Access) Campus Fabric based on customer requirements
• Design service provider-managed VPNs
• Design enterprise-managed VPNs
• Design a resilient WAN
• Design a resilient WAN network based on customer requirements
• Examine the Cisco SD-WAN architecture
• Describe Cisco SD-WAN deployment options
• Design Cisco SD-WAN redundancy
• Explain the basic principles of QoS
• Design Quality of Service (QoS) for the WAN
• Design QoS for enterprise network based on customer requirements
• Explain the basic principles of multicast
• Designing rendezvous point distribution solutions
• Describe high-level considerations when doing IP addressing design
• Create an IPv6 addressing plan
• Plan an IPv6 deployment in an existing enterprise IPv4 network
• Describe the challenges that you might encounter when transitioning to IPv6
• Design an IPv6 addressing plan based on customer requirements
• Describe Network APIs and protocols
• Describe Yet Another Next Generation (YANG), Network Configuration Protocol (NETCONF), and Representational State Transfer Configuration Protocol (RESTCONF)

 

This course also helps you prepare to take the exam, Designing Cisco Enterprise Networks v1.0 (ENSLD 300-420), which is part of the CCNP Enterprise and Cisco Certified Specialist – Enterprise Design certifications.

Schedule

Program Level

Advanced

Training Delivery Methods

Group Live

Duration

5 Days / 32 hours Training

CPE credits

26 NASBA CPE Credits

Field of Study

Information Technology

Advanced Prep

N/A

Course Registration

Candidates can choose to register for the course by via any of the below methods:

• Email: Sales@phoenixts.com
• Phone: 301-582-8200
• Website: www.phoenixts.com

Upon registration completion candidates are sent an automated course registration email that includes attachments with specific information on the class and location as well as pre-course study and test preparation material approved by the course vendor. The text of the email contains a registration confirmation as well as the location, date, time and contact person of the class.

Online enrolment closes three days before course start date.

On the first day of class, candidates are provided with instructions to register with the exam provider before the exam date.

Complaint Resolution Policy

To view our complete Complaint Resolution Policy policy please click here: Complaint Resolution Policy

Refunds and Cancellations

To view our complete Refund and Cancellation policy please click here:  Refund and Cancellation Policy 

Course Outline

Lecture Content

• Designing EIGRP Routing
• Designing OSPF Routing
• Designing IS-IS Routing
• Designing BGP Routing and Redundancy
• Understanding BGP Address Families
• Designing the Enterprise Campus LAN
• Designing the Layer 2 Campus
• Designing the Layer 3 Campus
• Discovering the Cisco SD-Access Architecture
• Exploring Cisco SD-Access Fabric Design
• Designing Service Provider-Managed VPNs
• Designing Enterprise-Managed VPNs
• Designing WAN Resiliency
• Examining Cisco SD-WAN Architectures Cisco SD-WAN Deployment Design Considerations
• Designing Cisco SD-WAN Routing and High Availability
• Understanding QoS Designing LAN and WAN QoS
• Exploring Multicast with Protocol-Independent Multicast-Sparse Mode
• Designing Rendezvous Point Distribution Solutions
• Designing an IPv4 Address Plan Exploring IPv6
• Deploying IPv6 Introducing Network APIs and Protocols
• Exploring YANG, NETCONF, RESTCONF, and Model-Driven Telemetry

Lab Outline

• Designing Enterprise Connectivity
• Designing an Enterprise Network with BGP Internet Connectivity
• Designing an Enterprise Campus LAN
• Designing Resilient Enterprise WAN
• Designing QoS in an Enterprise Network
• Designing an Enterprise IPv6 Network

Exam Information

ENSLD Certification Exam 300-420 Details:

• Number of Questions: 50-60
• Passing Score: 80%
• Test Duration: 90 minutes
• Test Format: Multiple Choice, Multiple Answer, Drag and drop, Testlets, Simlets, Router & Switch Simulations
• Test Delivery: Pearson VUE

ENSLD Certification Exam Domains:

Exam tests candidates on the following domains:

• Advanced Addressing and Routing Solutions
• Advanced Enterprise Campus Networks
• WAN for Enterprise Networks
• Network Services
• Automation